Origin	China
Model Number	IB30
Brand Name	Lvhuan

IB30 Injection blow moulding machine

Injection blow molding machine for 5ml-800ml bottles. The machine produces maximal 2,800 pcs bottles per hour. Suitable for most thermoplastic resins such as PE, PP, PS and so on .its products are widely used in medicine packing, the cosmetic packing of making up chemical industry, gifts & toys and so on.

Main features

1.     Use proportional variable pump , save 20% power consumption.

2.     The clamping framework adopts single-crossbeam and two shores, which enlarges the space of mould, Will be much easier to install mould.

3.     Optional tie-bar protection device makes clamping open and close while transfer table rise and drop , so the production efficiency has been improved obviously.

 IB30-3S Main Technical Parameters

NO.	Item	Data	NO.	Item	Data
1	Dia. Of Screw	40 mm	9	Pressure of comp air	1.0 Mpa
2	Heating power	9.5 kw	10	Consumption of comp air	0.3 m3/min
3	Clamping force 0f injection	300 KN	11	Consumption of  water	3 m3/h
4	Clamping force 0f blow	55 KN	12	Overall size L* W* H	3150*1150*2300 mm
5	The template opens distance	120 mm	13	High of bottle	165 mm
6	Cycle without injection	4 S	14	Dia. of  bottle	100 mm
7	Mould size L *W	400*250 mm	15	Total power	24.5 kw
8	Main motor power	15 kw	16	Machine weight	4 T

Notice: Due to continuous improvement, Specifications are subject to change without prior notice.

Cavity Number of One Mould and  Size of bottle .  (For Reference)

Diameter (mm)	25	30	40	50	60	70	75??/span>85
Height (mm)	60	80	80	100	120	150	150
Central distance (mm)	35	40	50	60	75	85	100
Cavity quantity	8	7	6	5	4	3	2

NOTE: The production cycle is about 10 seconds for 30ml bottle.

Packing: Sea-Worthy Strong Wooden Cases

 PRODUCT FEATURES:

1). Excellent mechanical strength, impact -resisting.

2). Non-cracking bottle mouth and thread are of precise measurement, enabling100% close match with the bottle cap.

3).The weight of the product can be destined.

4).The measurement and thickness of the product can meet the requirement of the design without any deviation.

5).The surface of the bottle mouth and the body is good luster and smoothness.

6).No rough selvedge will occur at the mouth or bottom of the bottle products, which saves the cost of the raw material.

7).On the bottom of the bottle there is no joint seam, and the strength is improved.

8).The joint seam on the bottle body is smooth.

IB30-3S Main Technical Parameters

1. Dia. Of Screw: 40mm

2. Max .theoretical capacity: 165 cm³

3. Electric heating power of cylinder: 6.5 k w

4. Electric heating control section: 4 qty

5. Clamping force 0f injection die: 300 KN

6. Clamping force 0f blow die: 55 KN

7. Opening distance of mould: 120mm

8. Idle time: 4 S

9. Max Mould size L *W: 400*250mm

10. Min. mould thickness: 180 mm

11. Main motor power: 15 k w

12. Die-heating power 3.2 kw

13. Pressure of hydraulic system: 14Mpa

14. Working Pressure of comp air: 1.0 M Pa

15. Displacement of comp air: 0.3 m³/h

16. Cooling water needed capacity: 3 m³/h

16. Overall size L* W* H: 3400*1150*2300 mm

17. Machine weight: 4 T

18. Range of formability product: 15-800 ml

19. High of formability product: 165 mm

20. Diameter of formability bottle: 100mm

21. Total power: 24.5 k w